Endotoxin

Endotoxin

Since the pharmaceutical industry produces injections of many kinds, testing for pyrogens is an absolute necessity. Pyrogens are substances that can cause fever, shock and in extreme cases even the death. Endotoxin is a pyrogen of Gram-negative bacteria. It is found as a natural component in the outer cell membrane and is released by cell lysis. Over 30 different biological activities of endotoxin are known, including macrophage activation, mitogenic activity and induction of interferon and colony-stimulating factors.

For a long time, the "Rabbit Pyrogen Test" was the drug of choice. In the 1970s, the LAL test (Limulus Amebocyte Lysate) was introduced. LAL comes from the amebocytes of the horseshoe crab Limulus polyphemus. Frederick Bang and Jack Levin observed that these amebocytes coagulate in the presence of Gram-negative bacteria. The technology for the endotoxin test was derived from this observation.

Gel Clot LAL assays

The Pyrogent Gel Clot Assay is a qualitative LAL test for endotoxins from Gram-negative bacteria. The assay is performed in glass tubes at 37°C. After one hour of incubation in a water bath or incubation block, the tubes are inverted 180°. If endotoxin contamination is present, a gel-like matrix will form and remain intact when the tube is inverted.

Kinetic Turbidimetric LAL Assays

For a quantitative endotoxin determination, Lonza offers the Kinetic Turbidimetric LAL Assays. This method is performed in a microplate using an incubating absorbance plate reader at the wavelength 340nm and at 37°C. Using special software, the turbidity is monitored over time. Endotoxin-containing samples show a faster increase in OD than non-contaminated samples. Endotoxin concentrations of samples can be determined.

Endpoint chromogenic LAL assays

This method is carried out in tubes or in microplates. After a certain time, the reaction mixture turns yellow and can be measured with a photometer at 405-410 nm. Positive samples give a stronger discoloration, or higher OD value. Using the accompanying standard, sample values can be quantitatively calculated.

Kinetic Chromogenic LAL Assays

Similar to the Endpoint Chromogenic LAL Assay, this method uses an absorbance reading at 405-410 nm. These tests are particularly suitable for the quality control of biological products, e.g. vaccines or antibiotics. The sensitivity range is between 0.005 and 50 EU / mL.

PyroGene Endpoint Fluorogenic LAL Assays

The PyroGene assay is a reliable alternative to traditional endotoxin tests. It relies on the activation of recombinant Factor C, an endotoxin-sensitive protein that initiates the traditional LAL cascade. The measurement is carried out with a fluorescence reader (ex: 380 nm / em: 440 nm) in a microplate. Standards allow quantification of positive samples in the range 0.01-10 EU / mL.

Set Descending Direction

147 items

per page
  1. E-Delivered WinKQCL 6 Software Package
    E-Delivered WinKQCL 6 Software Package
    Price is loading...
    Sku LON25-611E
    Manufact. Sku25-611E
    Packaging Unit1 piece
  2. E-Delivered WinKQCL 6 IOPQ Manual
    WinKQCL™ Software Version 6 Qualification Manual for Installation, Operation, and Performance, electronic delivery
    Price is loading...
    Sku LON25-614E
    Manufact. Sku25-614E
    Packaging Unit1 piece
  3. eLearning: Troubleshooting the BET
    This module explains different types of endotoxin test failures for gel clot and kinetic LAL assays
    Price is loading...
    Sku LONLAL-EL-6
    Manufact. SkuLAL-EL-6
    Packaging Unit1 piece
  4. eLearning: Overcoming Interference
    This module covers causes of interference by stage and type, inhibition vs. Enhancement
    Price is loading...
    Sku LONLAL-EL-5
    Manufact. SkuLAL-EL-5
    Packaging Unit1 piece
  5. eLearning:Working w/ Photometric Methods
    This module covers the basic principles of working with photometric methods
    Price is loading...
    Sku LONLAL-EL-4
    Manufact. SkuLAL-EL-4
    Packaging Unit1 piece
  6. eLearning: Working with Gel Clot
    This module describes how to work with the gel clot assay, including calculation of the Maximum Valid Dilution (MVD), product validation and the Initial Qualification (IQ) assay.
    Price is loading...
    Sku LONLAL-EL-3
    Manufact. SkuLAL-EL-3
    Packaging Unit1 piece
  7. eLearning: Understanding the BET
    This introductory module introduces assay mechanisms, the basic assay requirements, the need for endotoxin controls and how Limulus Amebocyte Lysate (LAL) is made.
    Price is loading...
    Sku LONLAL-EL-2
    Manufact. SkuLAL-EL-2
    Packaging Unit1 piece
  8. eLearning: Introduction to Endotoxin
    This module introduces the learner to endotoxin, the effects endotoxin can cause to the body, regulatory compliance and calculating acceptable endotoxin limits.
    Price is loading...
    Sku LONLAL-EL-1
    Manufact. SkuLAL-EL-1
    Packaging Unit1 piece
  9. E-Delivered WinKQCL 5 Validation Package
    E-Delivered WinKQCL 5 Validation Package
    Price is loading...
    Sku LON25-505E
    Manufact. Sku25-505E
    Packaging Unit1 piece
  10. E-Delivered WinKQCL 5 IOPQ Manual
    E-Delivered WinKQCL 5 IOPQ Manual
    Price is loading...
    Sku LON25-504E
    Manufact. Sku25-504E
    Packaging Unit1 piece
Set Descending Direction

147 items

per page